#!/bin/sh # # This is rc.conf - a file full of useful variables that you can set # to change the default startup behavior of your system. You should # not edit this file! Put any overrides into one of the ${rc_conf_files} # instead and you will be able to update these defaults later without # spamming your local configuration information. # # The ${rc_conf_files} files should only contain values which override # values set in this file. This eases the upgrade path when defaults # are changed and new features are added. # # All arguments must be in double or single quotes. # # $FreeBSD: src/etc/defaults/rc.conf,v 1.53.2.6 2000/06/24 20:51:27 dillon Exp $ ############################################################## ### Important initial Boot-time options #################### ############################################################## swapfile="NO" # Set to name of swapfile if aux swapfile desired. apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). apmd_enable="NO" # Run apmd to handle APM event from userland. apmd_flags="" # Flags to apmd (if enabled). pccard_enable="NO" # Set to YES if you want to configure PCCARD devices. pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address. pccard_beep="1" # pccard beep type. pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO). pccardd_flags="" # Additional flags for pccardd. pccard_conf="/etc/defaults/pccard.conf" # pccardd(8) config file local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs. local_periodic="/usr/local/etc/periodic /usr/X11R6/etc/periodic" # periodic script dirs rc_conf_files="/etc/rc.conf /etc/rc.conf.local" ############################################################## ### Network configuration sub-section ###################### ############################################################## ### Basic network and firewall/security options: ### # hostname="" # Set this! nisdomainname="NO" # Set to NIS domain if using NIS (or NO). dhcp_program="/sbin/dhclient" # Path to dhcp client program. dhcp_flags="" # Additional flags to pass to dhcp client. firewall_enable="NO" # Set to YES to enable firewall functionality firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) firewall_quiet="NO" # Set to YES to suppress rule display firewall_flags="" # Flags passed to ipfw when type is a file ipsec_enable="NO" # Set to YES to run setkey on ipsec_file ipsec_file="/etc/ipsec.conf" # Name of config file for setkey ip_portrange_first="NO" # Set first dynamically allocated port ip_portrange_last="NO" # Set last dynamically allocated port natd_program="/sbin/natd" # path to natd, if you want a different one. natd_enable="NO" # Enable natd (if firewall_enable == YES). natd_interface="fxp0" # Public interface or IPaddress to use. natd_flags="" # Additional flags for natd. tcp_extensions="NO" # Set to YES to turn on RFC1323 extensions. log_in_vain="NO" # YES to log connects to ports w/o listeners. tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). # For the following two options, you need to have TCP_DROP_SYNFIN and # TCP_RESTRICT_RST set in your kernel. Please refer to LINT for details. tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN # NOTE: this violates the TCP specification tcp_restrict_rst="NO" # Set to YES to restrict emission of RST icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets network_interfaces="auto" # List of network interfaces (or "auto"). ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. #ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. #ifconfig_ed0_alias0="inet6 fec0:0000:0000:0005::1 prefixlen 64" # Sample alias entry for IPv6. # # If you have any sppp(4) interfaces above, you might also want to set # the following parameters. Refer to spppcontrol(8) for their meaning. sppp_interfaces="" # List of sppp interfaces. #sppp_interfaces="isp0" # example: sppp over ISDN #spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" # User ppp configuration. ppp_enable="NO" # Start user-ppp (or NO). ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". # For details see man page for ppp(8). Default is auto. ppp_nat="YES" # Use PPP's internal network address translation or NO. ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. ### Network daemon (miscellaneous) & NFS options: ### syslogd_enable="YES" # Run syslog daemon (or NO). syslogd_flags="-s" # Flags to syslogd (if enabled). inetd_enable="YES" # Run the network daemon dispatcher (or NO). inetd_flags="-wW" # Optional flags to inetd # # named. It may be possible to run named in a sandbox, man security for # details. # named_enable="NO" # Run named, the DNS server (or NO). named_program="named" # path to named, if you want a different one. named_flags="" # Flags for named #named_flags="-u bind -g bind" # Flags for named kerberos_server_enable="NO" # Run a kerberos master server (or NO). kadmind_server_enable="NO" # Run kadmind (or NO) -- do not run on # a slave kerberos server kerberos_stash="" # Is the kerberos master key stashed? rwhod_enable="NO" # Run the rwho daemon (or NO). rwhod_flags="" # Flags for rwhod amd_enable="NO" # Run amd service with $amd_flags (or NO). amd_flags="-a /.amd_mnt -c 1800 -l syslog /host /etc/amd.map /net /etc/amd.map" amd_map_program="NO" # Can be set to "ypcat -k amd.master" nfs_client_enable="NO" # This host is an NFS client (or NO). nfs_client_flags="-n 4" # Flags to nfsiod (if enabled). nfs_access_cache="2" # Client cache timeout in seconds nfs_server_enable="NO" # This host is an NFS server (or NO). nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). single_mountd_enable="NO" # Run mountd only (or NO). mountd_flags="-r" # Flags to mountd (if NFS server enabled). nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). nfs_bufpackets="DEFAULT" # bufspace (in packets) for client (or DEFAULT) rpc_lockd_enable="NO" # Run NFS rpc.lockd (*broken!*) if nfs_server. rpc_statd_enable="YES" # Run NFS rpc.statd if nfs_server (or NO). portmap_enable="YES" # Run the portmapper service (or NO). portmap_program="/usr/sbin/portmap" # path to portmap, if you want a different one. portmap_flags="" # Flags to portmap (if enabled). rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). keyserv_flags="" # Flags to keyserv (if enabled). rarpd_enable="NO" # Run rarpd (or NO). rarpd_flags="" # Flags to rarpd. xtend_enable="NO" # Run the X-10 power controller daemon. xtend_flags="" # Flags to xtend (if enabled). pppoed_enable="NO" # Run the PPP over Ethernet daemon. pppoed_provider="*" # Provider and ppp(8) config file entry. pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). pppoed_interface="fxp0" # The interface that pppoed runs on. sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. sshd_enable="NO" # Enable sshd sshd_flags="" # Additional flags for sshd. ### Network Time Services options: ### timed_enable="NO" # Run the time daemon (or NO). timed_flags="" # Flags to timed (if enabled). ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). ntpdate_program="ntpdate" # path to ntpdate, if you want a different one. ntpdate_flags="" # Flags to ntpdate (if enabled). xntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). xntpd_program="ntpd" # path to ntpd, if you want a different one. xntpd_flags="-p /var/run/ntpd.pid" # Flags to ntpd (if enabled). # Network Information Services (NIS) options: ### nis_client_enable="NO" # We're an NIS client (or NO). nis_client_flags="" # Flags to ypbind (if enabled). nis_ypset_enable="NO" # Run ypset at boot time (or NO). nis_ypset_flags="" # Flags to ypset (if enabled). nis_server_enable="NO" # We're an NIS server (or NO). nis_server_flags="" # Flags to ypserv (if enabled). nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). ### Network routing options: ### defaultrouter="NO" # Set to default gateway (or NO). static_routes="" # Set to static route list (or leave empty). gateway_enable="NO" # Set to YES if this host will be a gateway. router_enable="NO" # Set to YES to enable a routing daemon. router="routed" # Name of routing daemon to use if enabled. router_flags="-q" # Flags for routing daemon. mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf). mrouted_flags="" # Flags for multicast routing daemon. ipxgateway_enable="NO" # Set to YES to enable IPX routing. ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. ipxrouted_flags="" # Flags for IPX routing daemon. arpproxy_all="" # replaces obsolete kernel option ARP_PROXYALL. forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") accept_sourceroute="NO" # accept source routed packets to us ### ATM interface options: ### atm_enable="NO" # Configure ATM interfaces (or NO). #atm_netif_hea0="atm 1" # Network interfaces for physical interface. #atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. #atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). #atm_macaddr_hea0="NO" # Override physical MAC address (or NO). #atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). #atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). atm_pvcs="" # Set to PVC list (or leave empty). atm_arps="" # Set to permanent ARP list (or leave empty). ### ISDN interface options: ### isdn_enable="NO" # Enable the ISDN subsystem (or NO). isdn_fsdev="/dev/ttyv4" # Output device for fullscreen mode (or NO for daemon mode). isdn_flags="-dn -d0x1f9" # Flags for isdnd isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace ### Miscellaneous network options: ### icmp_bmcastecho="NO" # respond to broadcast ping packets ### IPv6 options: ### ipv6_enable="NO" # Set to YES to set up for IPv6. ipv6_network_interfaces="auto" # List of network interfaces (or "auto"). ipv6_static_routes="" # Set to static route list (or leave empty). #ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 # route toward loopback interface. #ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon. ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon. ipv6_router_flags="" # Flags to IPv6 routing daemon. #ipv6_router_flags="-l" # Example for route6d with only IPv6 site local # addrs. #ipv6_network_interfaces="ed0 ep0" # Examples for router. # Choose correct prefix value. #ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. #ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. ipv6_default_interface="" # Default output interface for scoped addrs. # Now this works only for IPv6 link local # multicast addrs. prefixcmd_enable="YES" # Use prefix command to assign router prefix. rtadvd_enable="YES" # Set to YES to enable an IPv6 router # advertisement daemon. If set to YES, # this router becomes a possible candidate # IPv6 default router for local subnets. mroute6d_enable="NO" # Do IPv6 multicast routing. mroute6d_program="/usr/sbin/pim6dd" # Name of IPv6 multicast routing # daemon. mroute6d_flags="" # Flags to IPv6 multicast routing daemon. gif_interfaces="NO" # List of GIF tunnels (or "NO"). #gif_interfaces="gif0 gif1" # Examples typically for a router. # Choose correct tunnel addrs. #gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router. #gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router. stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 # tunneling interface. Specify this entry # to enable 6to4 interface. stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, # to limit peer addr range. Effective value # is 0-31. stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. # If you like, you can set "AUTO" for this. stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 ############################################################## ### System console options ################################# ############################################################## keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). keybell="NO" # bell to duration.pitch or normal or visual (or NO). keychange="NO" # function keys default values (or NO). cursor="NO" # cursor type {normal|blink|destructive} (or NO). scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). blanktime="300" # blank time (in seconds) or "NO" to turn it off. saver="NO" # screen saver: Uses /modules/${saver}_saver.ko moused_enable="NO" # Run the mouse daemon. moused_type="auto" # See man page for rc.conf(5) for available settings. moused_port="/dev/psm0" # Set to your mouse port. moused_flags="" # Any additional flags to moused. allscreens_flags="" # Set this vidcontrol mode for all virtual screens ############################################################## ### Miscellaneous administrative options ################### ############################################################## cron_enable="YES" # Run the periodic job daemon. lpd_enable="NO" # Run the line printer daemon. lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. lpd_flags="" # Flags to lpd (if enabled). usbd_enable="NO" # Run the usbd daemon. usbd_flags="" # Flags to usbd (if enabled). sendmail_enable="YES" # Run the sendmail daemon (or NO). sendmail_flags="-bd -q30m" # Flags to sendmail (if enabled) dumpdev="NO" # Device name to crashdump to (or NO). enable_quotas="NO" # turn on quotas on startup (or NO). check_quotas="YES" # Check quotas on startup (or NO). accounting_enable="NO" # Turn on process accounting (or NO). ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). osf1_enable="NO" # Alpha OSF/1 emulation loaded at startup (or NO). rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO). clear_tmp_enable="NO" # Clear /tmp at startup. ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib" # shared library search paths ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout" # a.out shared library search paths kern_securelevel_enable="NO" # kernel security level (see init(8)), kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure update_motd="YES" # update version info in /etc/motd (or NO) start_vinum="" # set to YES to start vinum ############################################################## ### Define source_rc_confs, the mechanism used by /etc/rc.* ## ### scripts to source rc_conf_files overrides safely. ## ############################################################## if [ -z "${source_rc_confs_defined}" ]; then source_rc_confs_defined=yes source_rc_confs ( ) { local i sourced_files for i in ${rc_conf_files}; do case ${sourced_files} in *:$i:*) ;; *) sourced_files="${sourced_files}:$i:" if [ -r $i ]; then . $i fi ;; esac done } fi